Insights

View:

Intel Raptor Lake rumored release date

2/3/2021Orla Power

Intel is expected to share some information at Innovation 2022 at the end of September about its upcoming Raptor Lake line of processors.

Tags:

Intel Intel Raptor Lake

In High Frequency Servers, Latency Prevails

2/3/2021Marina Bashneva

Low latency in High Frequency Servers for HFT (High Frequency Trading) is one of the vital elements to success. Among many factors that effect latency, hardware and network are the key elements to successfully achieving the lowest latency possible. High frequency trading works at an extremely high trading rate and as a result, time and speed are extremely important. Algorithms profitability are often extremely reliant on a particular set of data points being gathered and ordered in a low latency fashion.

FPGAs in High Frequency Servers

1/27/2021Marina Bashneva

Tags:

fpga HFT HFT Servers High Frequency Servers High Frequency Trading Overclocking

Creating Alerts to Detect Critical Hardware Errors

9/14/2020Kirill Gindush

Tags:

Data Center Infrastructure Email Alerts Hardware Error IT Hardware IT Infrastructure Servers

Power Hungry CPUs and “Phantom” Throttling Featuring the 10980XE

7/14/2020Betim Begolli

Today, I would like to talk about power-hungry CPUs and “phantom” throttling, featuring 10980XE. Intel’s 10980XE can require more than 500+W to reliably run at overclock speeds surpassing ~4.7GHz. In our testing we found an issue that was more difficult to spot with the 7980 or 9980. At that time we could hit what we saw as the maximum safe daily overclock on the 7980XE with our cooling solution, so we didn’t experience issues with power delivery to the CPUs to obtain the 4.4-4.7GHz they were running at.

Intel Software RAID vs. Hardware RAID

6/1/2020Kirill Gindush

Tags:

Intel IT Hardware IT Infrastructure RAID Software

Supercomputing & High Density Racks

4/13/2020Betim Begolli

Tags:

AMD Epyc HPC Server liquid cooling supercomputing

ICC COVID-19 Response

3/23/2020Marina Bashneva

Prepping a System for Subzero Overclocking

12/24/2019Aaron Bakaitis

In overclocking there is a constant issue of heat created by the CPU. Not only does it lower the stability of a processor as the temperature increases it also can cause damage to the CPU and lowers the tolerance to higher voltages which further causes damage. Inversely as temperatures decrease there is generally an increase of stability and a higher tolerance to voltage before true damage is done.