INSIGHTS
FAQ | High Frequency Servers
High Frequency Servers FAQOptimizing High Frequency Servers can be difficult because of the nature of the performance factors that are related to High Frequency Servers. Optimizing your use of FPGAs and optimizing low latency parameters and hardware ensure that during...
Who has RTX 3000 and AMD 6000 GPUs in stock?
Ever since the launch of the new Nvidia RTX (3080, 3070, 3060 Ti and 3090) and AMD RX graphics cards (6800 and 6800 XT), both manufacturers have experienced delays in shipping out units to fulfil demand. One of the best ways you can get these units, as well as custom...
In High Frequency Servers, Latency Prevails
Low latency in High Frequency Servers for HFT (High Frequency Trading) is one of the vital elements to success. Among many factors that effect latency, hardware and network are the key elements to successfully achieving the lowest latency possible. High frequency...
FPGAs in High Frequency Servers
The parallel processing nature of FPGA ensures that FPGAs are the optimal way to implement High Frequency Trading at the compute level. ICC has expertise around FPGAs and low latency computing solutions for High Frequency Trading.
What are High Frequency Servers?
Speed, execution and money all go hand in hand. Time to complete a transaction is imperative within the financial world and this is where High Frequency Servers come into play.
Creating Alerts to Detect Critical Hardware Errors
When monitoring key elements of your server infrastructure, the main aim is to create alerts to detect hardware errors. E-mail alerts are a good example of this practice. When a hardware error is discovered in the Supermicro IPMI event log, there are many ways of...
Power Hungry CPUs and “Phantom” Throttling Featuring the 10980XE
Today, I would like to talk about power hungry CPUs and "phantom" throttling, featuring 10980XE. Intel’s 10980XE can require more than 500+W to reliably run at overclock speeds surpassing ~4.7GHz. In our testing we found an issue that was more difficult to spot with...
Intel Software RAID vs. Hardware RAID
This post will feature both a general overview of Intel software RAID vs. hardware RAID. The comparison will include performance numbers. PROS CONS No additional hardware required RAID levels are limited Cheaper cost No dedicated cache Very easy to use Slower...
Supercomputing & High Density Racks
At ICC we’ve now deployed the ICC AXIS™ R-725a. Testing on the AMD EPYC 7000 series in our lab showed an increase of ~.1GHz in performance per core on these high core count processors with liquid cooling vs. air. While that does not seem like a big number, it yields a...
ICC COVID-19 Response
To maximize the containment of COVID-19, the state of Illinois has issued a state-wide “stay at home” order as of Saturday, March 21, 2020. While the evolving COVID-19 situation has presented new challenges, ICC is well prepared to continue to respond with the best...
Prepping a System for Subzero Overclocking
In overclocking there is a constant issue of heat created by the CPU. Not only does it lower the stability of a processor as the temperature increases it also can cause damage to the CPU and lowers the tolerance to higher voltages which further causes damage....
Linux System Load Averages
Helping to Understand the Mystery Of Linux System Load Averages. While load averages are a metric that are widely used for monitoring the health of a system. Quite a few organizations use this metric for capacity planing without fully understanding where the limits...