7045A-C3B 4U/Tower Supermicro Dual Xeon 5400/5200 Low-Noise SuperWorkstation 8x SAS
|
|
|
|
|
SKU: SSMDI-4-7045A-C3B
Weight: 70 lbs
|
|
|
|
7045A-C3B 4U/Tower Supermicro Dual Xeon 5400/5200 Low-Noise SuperWorkstation 8x SAS
|
|
|
|
| |
|
Product Details
|
Motherboard
Super X7DCA-3
Processor/Cache
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type: Quad-Core Intel® Xeon®Processor 5400/5300 sequence (Harpertown/Clovertown processor) up to 3.20GHz
Dual-Core Intel®
Xeon®Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
1333 / 1066 MHz system bus
Software Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
System Memory
Capacity Six 240-pin DIMM sockets
Supports up to 48GB 667/533MHz DDR2 ECC Register memory
Memory must be populated in pairs
Type 667/533MHz Register DDR2 ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 512MB, 1GB, 2GB, 4GB, 8GB**
Voltage 1.8V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
On-Board Devices
Intel® 5100 (San Clemente) chipset
Intel® ICH9R + PXH-V
LSI SAS1068E
RAID 0, 1, 10 support
(Optional: AOC-IButton68) RAID 5 support
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows only)
RAID 0, 1, 10 support (Linux)
Support for Intelligent Platform Management Interface v.2.0
200-pin IPMI slot (SIMLP)
(Optional: AOC-SIMLP-B)
(Optional: AOC-SIMLP-3) with 3rd LAN support
NOTE: KVM-over-LAN not supported - there is no DVO signal to the IPMI slot
Intel® Dual 82573V/L Gigabit Ethernet Controller
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel® I/OAT support for fast, scaleable, and reliable networking
High Definition 7.1 Channel Audio
Super I/O Winbond 83627DHG chip
Clock Generator CK505 chip
Expansion Slots
1 (x16) PCI-e slot
1 (x4) PCI-e (using x16) slot
2x 64-bit 133/100MHz PCI-X (3.3V) slots
2x 32-bit 33MHz PCI (5V) slots
Input / Output
8 SAS / SATA ports
Six Serial ATA ports
Six SATA hard drives supported
Single EIDE channel supports up to two UDMA IDE devices(IDE-M, IDE-S) including CF card
Supports UDMA Mode 5, PIO Mode 4, and ATA/100
1 Floppy controller; 1.44 MB
2x RJ45 LAN ports
4x USB rear ports
6x USB internal header
10 total USB ports, 2.0 Compliant
Audio High Definition 7.1 Channel Audio
Line-in / Line-out / Microphone Ports
PS/2 keyboard and mouse ports
1 Fast UART 16550 serial port
1 Header
1x ECP / EEP Parallel Port
Chassis
4U Rackmountable / Tower
Optional Rackmount Kit (CSE-PT26)
Model SC743TQ-865-SQ
Dimensions
Height 7.0" (178mm)
Width 17.2" (437mm)
Depth 25.5" (648mm)
Gross Weight 63 lbs (28.6kg)
Available Colors Black
Front Panel
Power On/Off button
System Reset button
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat / Fan Fail LED
2x USB Ports
Drive Bays
6x SAS / SATA Hot-swap Drives
[90o Rotatable] 2x 5.25" Peripheral Drive Bay
1x 5.25" Bay For Floppy Drive
Peripheral Drives
Panasonic 3.5" 1.44MB Floppy Drive
SAS / SATA Backplane
SC743 SAS / SATA Backplane w/ Enclosure Management
System Cooling
2x 8cm Hot-swappable PWM Cooling Fans
1x 9cm Hot-Swappable Rear Exhaust PWM Fan
2x Active heatsink w/ heatpipe
Power Supply
865W AC power supply w/ PFC
AC Voltage 100 - 240V, 50-60Hz, 12-6 Amp
+5V standby 6.5 Amp
+12V 70 Amp
+5V 30 Amp
+3.3V 30 Amp
-12V 1 Amp
PC Health Monitoring
Monitors for CPU Cores,+1.8V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
CPU Core 6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Eight 4-pin fans
8x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Support for 3-pins
Low noise fan speed control
Pulse Width Modulated (PWM) fan connectors
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
CPU / System Overheat LED
Suspend-state Indicator LED
+5V Standby alert LED
Chassis Intrusion Detection
Chassis Intrusion Header
SDDC Support
|
|
|
|
