6015TC-10G 1U two nodes Supermicro Dual Xeon 5400/5200 Server 2x SATA
|
|
|
|
|
SKU: SSMDI-1-6015TC-10G
Weight: 44 lbs
|
|
Color:
|
|
|
6015TC-10G 1U two nodes Supermicro Dual Xeon 5400/5200 Server 2x SATA
|
|
|
|
| |
|
Product Details
|
Motherboards
Super X7DCT-10G + Super X7DCT-10G
Processor/Cache
Dual 771-pin LGA Sockets
Supports up to Dual Intel 64-bit Xeon processor(s) of the same type below:
Quad-Core Intel
Xeon Processor
5400/5300 sequence (Harpertown/Clovertown processor) up to 3.16 GHz
Dual-Core Intel
Xeon Processor
5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
1333 / 1066 MHz system bus
Software Supports 64-bit Operating Systems
Supports 32-bit Operating Systems
System Memory (per Node)
Six 240-pin DIMM sockets
Supports up to 48 GB 667/533MHz DDR2 ECC Register DIMM memory
Dual channels memory bus
677/533MHzECC Register DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 1GB, 2GB, 4GB, 8GB
1.8V only
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices (per Node)
Intel 5100 (San Clemente) chipset
Intel ICH9R SB
Intel ICH9R SB SATAII Controller
RAID 0, 1, 5, 10 support (Windows)
RAID 0, 1, 10 support (Linux)
Support for Intelligent Platform Management Interface v.2.0 / 1.5
200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+))
Intel 82598EB 10 Gigabit Ethernet Controller with CX4 interface
Intel 82573V & 82573L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
Intel I/OAT support for fast, scaleable, and reliable networking
ATI ES1000 controller with 32 MB of video memory
Super I/O Winbond W83627HG chip
Clock Generator ICS9LPR501 chip
Input / Output (per Node)
Four Serial ATA ports
Four SATA hard drives supported
2x RJ45 LAN ports
1x CX4 LAN port
2 rear + 1 Type A connector + 2 headers (2 Ports)
5 total USB ports, 2.0 Compliant / 1.1 Compliant
1x VGA Port
1 Fast UART 16550 serial port
System BIOS
16Mb SPI Flash with Phoenix BIOS
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0/3.0
USB Keyboard support
Hardware BIOS Virus protection
Chassis
1U Rackmount
Model SC808T-780
Dimensions
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 27.75" (705mm)
Gross Weight 40 lbs (18.1kg)
Available Colors Black
Front Panel (per Node)
Power On/Off button
System Reset button
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Expansion Slots (per Node)
1 (x16) PCI-e slot (Low Profile)
Drive Bays (per Node)
2x 3.5" SATA Hot-swap drive bays
SATA Backplane
1U SATA Backplane
System Cooling
6x Cooling Fans
Power Supply
700W / 780W AC-DC power supply w/ PFC
AC Input 100-240V, 60-50Hz, 9.5-3.5Amp
+5V sb 4 Amp
+12V 65 Amp 180-240Vac
58 Amp 100-140Vac
Management
Software Optional IPMI (Intelligent Platform Management Interface) v1.5 / 2.0
Super Doctor III
Watch Dog
NMI
ACPI Power Management
Main Switch Override Mechansim
Power-on mode for AC power recovery
PC Health Monitoring
Monitors for CPU Cores,+1.5V, +3.3V, +5V, +-12V, +5 Stdby, VBAT
Core 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Total of three 4-pin fans
3x fans with tachometer monitoring
Status monitor for speed control
Status monitor for on/off control
Low noise fan speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
CPU / System Overheat LED
Suspend-state Indicator LED
SDDC Support
|
|
|
|
