1. Intel Xeon X5600 series processor (1366 socket)
2. Up to 24GB DDR3 1333, 1066 & 800 ECC / non-ECC Un-Buffered DIMM
3. 3 (x8) PCI-Express 2.0 (1 in x16 slot), 1 (x4) PCI-Express (using x8 slot), 2x 32-bit PCI Slots
4. Dual Intel 82574L Gigabit Ethernet Controller Graphics
5. 6 x 3.5" Hot-swap SAS/SATA Drive Bays
6. 400W AC power supply
7. Optional: Integrated IPMI 2.0 with Dedicated LAN and SAS Controller (only on X8ST3-F models)
Motherboard
X8STE
X8ST3-F
Processor/Cache
CPU: LGA 1366 Socket, Intel Xeon 5600 series
System Memory
Memory Capacity: Supports up to 24 GB 1333 / 1066 / 800MHz DDR3 ECC / non-ECC Un-Buffered memory, Three Channel memory bus, and 6 DIMM sockets
Memory Type: 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 256MB, 512MB, 1GB, 2GB, 4GB
Memory Voltage: 1.5 V
Error Detection: Corrects single-bit errors, Detects double-bit errors (using ECC memory), and Supports Intel x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset: Intel X58 Express chipset, ICH10R
SAS: LSI SAS1068E, RAID 0, 1, 10 support, and (Optional: AOC-IButton68) RAID 5 support (SAS available only on X8ST3-F models)
SATA: Intel ICH10R SATA 3.0Gbps Controller, RAID 0, 1, 5, 10 support
IPMI: Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, and Nuvoton WPCM450 BMC (only on X8ST3-F models)
Network Controllers: 2x Intel 82574L Gigabit Ethernet Controllers, Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output, and 1x Realtek RTL8201N PHY (dedicated IPMI - only on X8ST3-F models)
VGA: VGA Matrox G200eW 8MB DDR2
Super I/O: Winbond 83627DHG-P
Clock Generator: CK505
Input / Output
SAS: 8 SAS / SATA ports (only on X8ST3-F models)
Serial ATA: 6 SATA ports, 6 SATA hard drives supported
LAN: 2x RJ45 LAN ports
USB: 2x USB rear ports, 2x USB on-board, 2x USB internal header (4 ports), Total 8 USB 2.0 Compliant
VGA: 1x VGA port
Keyboard / Mouse: PS/2 keyboard and mouse ports
Serial Port / Header: 1x Fast UART 16550 serial port, and 1x internal header
Expansion Slots
PCI-Express: 3 (x8) PCI-e 2.0 slots (1 using x16 slot), and 1 (x4) PCI-e slot (using x8 slot)
PCI: 1 32-bit PCI slot
System BIOS
BIOS Type: 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: DMI 2.3, PCI 2.2, ACPI 1.0 / 2.0, USB Keyboard support, and SMBIOS 2.3
Management
Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support (X8ST3F models only), Super Doctor III, Watch Dog, and NMI
Power Configurations: ACPI / ACPM Power Management, Main Switch Override Mechanism, Wake-On-LAN (WOL) header, Keyboard Wakeup from Soft-Off, Power-on mode for AC power recovery, and Internal/External modem ring-on
PC Health Monitoring
CPU: Monitors for CPU Cores, +1.8V, +3.3V, +5V, +/-12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset Voltages; 5-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
FAN: Total of 6 fan headers supporting up to 6 fans, Six 4-pin fan headers, 6x fans with tachometer status monitoring, Status monitor for speed control, Status monitor for on/off control, Support 3-pin fans (w/o speed control), Low noise fan speed control, and Pulse Width Modulated (PWM) fan connectors
Temperature: Monitoring for CPU and chassis environment, CPU thermal trip support, FC temperature sensing logic, Thermal Monitor 2 (TM2) support, and PECI
LED: CPU / System Overheat LED, and +5V Standby alert LED
Other Features: Chassis intrusion detection, Chassis intrusion header
Operating Environment / Compliance
RoHS: RoHS Compliant 6/6, Pb Free
Environmental Spec: Operating Temperature: 10 to 35C (50 to 95F), Non-operating Temperature: -40 to 70C (-40 to 158F), Operating Relative Humidity: 8% to 90% (non-condensing), and Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor 2U chassis support for motherboard size - 12" x 13" E-ATX
Model 822T-400LPB
Processor Support UP Xeon 3200/3000, Core2 Quad/Duo Processors
Dimensions Height: 3.5" (89mm)
Width: 16.8" (426mm)
Depth: 25.6" (650mm)
Gross Weight: 50 lbs (22.7kg)
Expansion Slots 7x low-profile full-length expansion slots
Drive Bays Hot-swap: 6x 3.5" SATA Hot-swap drive trays; SAS or enterprise SATA HDD only recommended
Peripheral Bay: 1x 5.25" full-height peripheral bay
SAS/SATA Backplane 1x 2U SAS / SATA backplane
Peripheral Drives DVD-ROM Slim DVD-ROM drive
Front Panel Buttons: Power On/Off button, and System Reset button
LEDs: Power LED, Hard drive activity LED, 2x Network activity LEDs, System Overheat LED
System Cooling Fans: 4x 80mm coolinig fans
System Monitoring Chassis intrusion switch
Operating Environment (System) Operating Temperature Range: 10 - 35 C (50 - 95 F)
Non-Operating Temperature Range: -40 - 70 C (-40 - 158 F)
Humidity Range: 8 - 90% non-condensing
Non-Operating Humidity Range: 5 - 95% non-condensing
Power Supply 400W AC high-efficiency power supply w/ PFC
AC Voltage: 100 - 240V, 50 - 60Hz, 6 - 2.7Amp
+5V: 30 Amp
+5V standby: 4 Amp
+12V: 32 Amp
-12V: 0.5 Amp
+3.3V: 25 Amp
Certification: 80 PLUS Certified
Regulatory (Power Supply) Power Supply Safety / EMC: USA - UL listed, Canada - CUL listed, Germany - TUV Certified, EN 60950/IEC 60950-Compliant, CB Report, and CCC Certification
