5015TB-10GB 1U Supermicro Dual-node UP Xeon Server w/10 Gigabit
|
|
|
|
|
SKU: SYS-5015TB-10GB
Weight: 48 lbs
5015TB-10GB 1U Supermicro Dual-node UP Xeon Server w/10 Gigabit More details...
|
|
Color:
|
|
|
5015TB-10GB 1U Supermicro Dual-node UP Xeon Server w/10 Gigabit
|
|
|
|
| |
|
Product Details
|
Motherboards
Super X7SBT-10G
Processor
Single LGA775 ZIF Socket
Supports a Quad-Core Intel Xeon 3000 Sequence, Intel Core2 Extreme QX9000/QX6000, Intel Core2 Quad Q9000/Q6000 series,Intel Core2 Duo E8000/E7000/E6000/E4000 series, Intel Pentium dual-core E2000 series, Intel Celeron dual-core E1000 series, Intel Celeron 400 series, NOTE: 1600MHz CPU has to use 1600 MHz XMP Memory, 1600 / 1333 / 1066 / 800 MHz system bus
System Memory (per Node)
Four 240-pin DIMM sockets
Supports up to 8 GB of unbuffered, non-ECC DDR3 1333/1066/800MHz memory (Dual Channel) or up to 4 GB Non-ECC 1600MHz XMP DDR3 memory
DDR3 1333/1066/800MHz unbuffered, non-ECC SDRAM, 240-pin gold-plated DIMMs or Non-ECC 1600MHz XMP DDR3 memory
256 MB, 512 MB, 1 GB, 2 GB
Dynamic (1.5V to 1.9V)
On-Board Devices (per Node)
Intel X48 chipset
ICH9R + Intel 82573V + Intel 82573L
Intel ICH9R SATA controller built-in (3 Gbps)
RAID 0, 1, 5, 10 (Windows)
RAID 0, 1, 10 (Linux)
Support for Intelligent Platform Management Interface v.2.0
IPMI 2.0 with virtual media over LAN & optional KVM-over-LAN support
SIMSO Slot - Supermicro Intelligement Management
(Optional: AOC-SIMSO-HTC, AOC-SIMSO+)
NOTE: AOC-SIMSO+ must use Dedicated LAN for KVM-over-LAN function
Intel 82598EB 10 Gigabit Ethernet Controller with CX4 interface
Intel 82573V & 82573L Gigabit Ethernet Controllers
Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
On-board XGI Volari Z9S (32MB) graphics
Input / Output (per Node)
Four Serial ATA ports (3 Gbps performance)
Four SATA hard drives supported
2x RJ45 LAN ports
Up to 8x USB 2.0 / 1.1 compliant ports
2 rear ports + 2 internal headers + 2 Type A ports
1x VGA port
1x Fast UART 16550 serial port
1x internal header
System BIOS (per Node)
16Mb Flash EEPROM with Phoenix BIOS
Plug and Play (PnP)
DMI 2.3 support
PCI 2.2
ACPI 1.0 / 2.0 (S3 Optional)
ACPI 1.0 (limited)
USB Keyboard support
Hardware BIOS Virus protection
Chassis
1U Rackmount
Model CSE-808LT-780B
Dimensions
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 27.75" (705mm)
Available Colors Black
Front Panel (per Node)
Power On/Off button
System Reset button
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Expansion Slots (per Node)
1 (x16) PCI-e 2.0 slot (Low Profile)
Drive Bays (per Node)
2x 3.5" SATA Hot-swap drive bays
SATA Backplane
1U SATA Backplane
System Cooling
6x Cooling Fans
Power Supply
700W / 780W AC to DC power supply w/ PFC AC Input
100-240V, 60-50Hz, 9.5-3.5Amp
Management
Software
Super Doctor III
Watch Dog
NMI
Power Configurations
ACPI / ACPM Power Management
Main Switch Override Mechanism
Keyboard Wakeup from Soft-Off
CPU Fan auto-off in sleep mode
Power-on mode control for AC power loss recovery
PC Health Monitoring (per Node)
Monitors for CPU Cores ( +1.8V, +3.3V, +5, +-12V, +3.3V Standby, +5V Standby, VBAT, HT, Memory, Chipset)
CPU Core 5-Phase-switching voltage regulator with auto-sense from 0.3750V-1.6000V
Total of three 4-pin fan headers
3x fans with tachometer monitoring
Status monitor with firmware / software speed control
Status monitor for on/off control
Low noise fan speed control
Monitoring for CPU and chassis environment
CPU Thermal Trip support
Thermal Control for 8x Fan Connectors
PSU I2C temperature sensing logic
Thermal Monitor (TM2) Support
PECI
CPU / System Overheat LED
Suspend-state indicator LED
Operating Environment / Compliance
RoHS Compliant 5/6, Server Exemption
Environmental Specifications
Operating Temperature: 10C to 35C (50F to 95F)
Non-operating Temperature:-40C to 70C (-40F to 158F)
Operating Relative Humidity:8% to 90% (non-condensing)
Non-operating Relative Humidity:5% to 95% (non-condensing)
|
|
|
|
