1. Dual Intel 5500 series Xeon Quad/Dual-Core, with QPI up to 6.4 GT/s
2. Up to 48GB DDR3 1333/ 1066/ 800MHz ECC Registered DIMM
3. 1 (x16) PCI-E 2.0, 2 (x8) PCI-E 2.0, 1 (x4) PCI-E, 2x PCI 33MHz slots
4. Dual Intel 82574L Gigabit Ethernet Controller
5. 24x 3.5" Hot-swap SAS Drive Bays
6. Remote Monitoring and KVM through IMPI
8. 900W Redundant AC to DC power supply w/ PFC
Motherboard
X8DTi-F
X8DTi-LN4F
Processor/Cache
Dual 1366-pin LGA Sockets
Supports up to two Intel 64-bit Xeon Quad-Core Processor 5500 sequence (Nehalem-EP processor)
NOTE: Support processors with Max TDP < 100W
QPI: up to 6.4 GT/s
System Memory
12x 240-pin DIMM sockets
Supports up to 192 GB 1333 / 1066 / 800MHz DDR3 ECC Registered memory
Supports up to 48 GB 1333 / 1066 / 800MHz DDR3 ECC Unbuffered memory
Memory Mirroring supported
Memory Type: 1333 / 1066 / 800MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 1GB, 2GB, 4GB (8GB available for X8DTL-3 and X8DTL-6 models)
Memory Voltage: 1.5 V
Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset:Intel 5500 (Tylersburg) chipset (ICH10R + IOH-24D)
SAS: LSI SAS1068E RAID 0, 1, 10 support, and Optional: AOC-IButton68 for RAID 5 support
SAS2: LSI 6Gbps SAS 2008, RAID 0, 1, 10 support, and Optional: AOC-IMRRAKEY-2008-LSI) RAID 5 support
SATA: Intel ICH10R SATA 3.0Gbps Controller Supports:RAID 0, 1, 5, 10 (Windows) RAID 0,1,10 (LINUX)
IPMI: IPMI 2.0 with virtual media over LAN and KVM-over-LAN support Winbond WPCM450 BMC (F models only)
Network Controllers: 2x Intel 82574L Gigabit Ethernet Controllers (Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output)
IPMI Network Controller: 1x Realtek RTL8201N PHY (dedicated IPMI) (F models only)
Graphics:Matrox G200eW 8 MB DDR2
Super I/O: Winbond 83827HF chip
Input / Output
Serial ATA: Six Serial ATA ports
LAN: 2x RJ45 LAN ports, 1x RJ45 Dedicated IPMI LAN port
USB 2x USB rear ports + 2x USB on-board + 4x USB internal headers
VGA:1x VGA Port
PS/2 keyboard and mouse ports
Serial Port / Header 1 Fast UART 16550 serial port (1 Fast UART 16550 serial header Option)
Expansion Slots
1x (x8) PCI-E 2.0 (1 in x16 slot)
System BIOS
BIOS Type: 32Mb SPI Flash EEPROM with AMI BIOS
Plug and Play (PnP)
PCI 2.2
ACPI up to 3.0
USB Keyboard support
Environmental Spec
Operating Temperature: 10 to 35 C (50 to 95 F)
Non-operating Temperature: -40 to 70 C (-40 to 158 F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor Chassis Model: 216E2-R900
2U High Density 2.5" HDD Chassis; 24x 2.5" Hot-swap SAS/SATA HD bays
Dimensions Height: 3.5" (89mm)
Width: 17.2" (437mm)
Depth: 24.8" (630mm)
Gross Weight: 57 lbs (25.9kg)
Expansion Slot 1x Full-height Universal I/O Expansion Slot (Riser Card Required); 3x Full-height, Full-length expansion slot; 3x Low-profile Expansion Slots
Drive Bay 24x 2.5" SAS / SATA Hot-swap drive trays
SAS/SATA Backplane 2U dual Expander Backplane, features: Scalability through cascading
3Gb support
Inband SES-2 Enclosure Management
SAS/SATA support
Dual input/output SFF 8087 connectors
Front Panel Buttons: Power On/Off Button + System Reset Button
LEDs: Power LED + Hard drive activity LED + 2x Network activity LEDs + System Overheat + Power fail
System Cooling 3x 80mm 6300 RPM PWM fans
Operating Environment (System) Operating Temperature Range: 10 - 35 C (50 to 95 F)
Non-Operating Temperature Range: -40 - +70 C (-40 to 158 F)
Humidity Range: 8 - 90% non-condensing
Non-Operating Humidity Range: 5 - 95% non-condensing
Power Supply 900W (1 + 1) Redundant AC to DC power supply w/ PFC
AC Voltage: 100 - 240V, 50 - 60Hz, 11 - 4.5Amp
+5V: 50 Amp
+5V standby: 4 Amp
+12V: 75 Amp
-12V: 0.6 Amp
+3.3V: 30 Amp
Regulatory (Power Supply Safety / EMC) USA - UL listed, FCC
Canada - CUL listed
Europe/CE Mark
CCC Certification
EN 60950/IEC 60950-Compliant
Germany - TUV Certified
