1. Intel Xeon X3400 / L3400 series processors
2. Up to 32GB DDR3 1333/1066/800MHz ECC Registered DIMM / 16GB Unbuffered DIMM
3. 2 (x8) PCI-Express 2.0, 1 (x4) PCI-Express (using x8 slot), and 1 32-bit PCI slot
4. Dual Intel 82574L Gigabit Ethernet Controller Graphics
5. 2U High Density 2.5" HDD Chassis; 24x 2.5" Hot-swap SAS/SATA HD bays
6. IPMI 2.0 Support
8. 900W (1 + 1) Redundant AC to DC power supply w/ PFC
Motherboard
X8SIL/F
Physical Stats
Form Factor: ATX (X8SIL models are Micro ATX)
Dimensions: 12" x 9.6" (30.5cm x 24.4cm) [X8SIL models dimensions: 9.6" x 9.6" (24.4cm x 24.4cm)]
Processor/Cache
CPU: LGA 1156 Socket, Intel Xeon X3400 series, and Intel Xeon L3400 series
System Memory
Memory Capacity: 6x 240-pin DIMM sockets (4x on X8SIL models), Supports up to 32 GB DDR3 ECC Registered memory (RDIMM) in 4 DIMM sockets, Supports up to 16 GB DDR3 ECC Un-Buffered memory (UDIMM) in 4 DIMM sockets, 1333 / 1066 / 800 MHz, and Note: Supports 1-Gb and 2-Gb x8 devices only
Memory Type: 1333 / 1066 / 800 MHz ECC Registered / ECC Unbuffered DDR3 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 1GB, 2GB, 4GB, 8GB
Memory Voltage: 1.5 V
Error Detection: Corrects single-bit errors, and Detects double-bit errors (using ECC memory)
On-Board Devices
Chipset: Intel 3420 chipset (Intel 3400 on X8SIL models)
SAS: LSI 6Gbps SAS 2008, RAID 0, 1, 10 support, and (Optional: AOC-IMRRAKEY-2008-LSI) RAID 5 support (SAS available only on X8SI6 models)
SATA: 6x SATA (3 Gbps) (4x SATA on X8SIL models), RAID 0, 1, 5, 10 support (Windows), and RAID 0, 1, 10 support (Linux) (no on-board RAID on X8SIL models)
IPMI: Support for Intelligent Platform Management Interface v.2.0, IPMI 2.0 with virtual media over LAN and KVM-over-LAN support, and Nuvoton WPCM450 BMC (F models only)
Network Controllers: 2x Intel 82574L Gigabit Ethernet Controllers, Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output, and 1x Realtek RTL8201N PHY (dedicated IPMI - F models only)
VGA: VGA Matrox G200eW 16MB DDR2
Super I/O: Winbond 83627DHG-P
Clock Generator: CK505
Expansion Slots
PCI-Express: 2 (x8) PCI-E 2.0 slot, and 1 (x4) PCI-E (using x8 slot)
PCI: 1 32-bit PCI slot
Input / Output
SAS: 8x 6Gbps SAS (iPass) (X8SI6 models only)
Serial ATA: 4 SATA ports , 4 SATA hard drives supported
LAN: 2x RJ45 LAN ports; 1x RJ45 Dedicated IPMI LAN port (F models only)
USB: 2x USB rear ports, 1x USB on-board, 1x USB internal header - 4 ports total; 5 USB 2.0 Compliant
VGA: 1x VGA port
Keyboard / Mouse: PS/2 keyboard and mouse ports
Serial Port / Header: 1x Fast UART 16550 serial port, and 1x internal header
Operating Environment / Compliance
RoHS: RoHS Compliant 6/6, Pb Free
Environmental Spec: Operating Temperature: 10 to 35C (50 to 95F), Non-operating Temperature: -40 to 70C (-40 to 158F), Operating Relative Humidity: 8% to 90% (non-condensing), and Non-operating Relative Humidity: 5 to 95% (non-condensing)
System BIOS
BIOS Type: 32Mb SPI Flash EEPROM with AMI BIOS
BIOS Features: DMI 2.3, PCI 2.2, ACPI 1.0 / 2.0, USB Keyboard support, and SMBIOS 2.3
Management
Software: IPMI (Intelligent Platform Management Interface) v1.5 / 2.0 with KVM support (F models only), Super Doctor III, Watch Dog, and NMI
Power Configurations: ACPI / ACPM Power Management, Main Switch Override Mechanism, Wake-On-LAN (WOL) header, Keyboard Wakeup from Soft-Off, Power-on mode for AC power recovery, and Internal/External modem ring-on
Environmental Spec
Operating Temperature: 10 to 35 C (50 to 95 F)
Non-operating Temperature: -40 to 70 C (-40 to 158 F)
Operating Relative Humidity: 8% to 90% (non-condensing)
Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor Chassis Model: 216E2-R900
2U High Density 2.5" HDD Chassis; 24x 2.5" Hot-swap SAS/SATA HD bays
Dimensions Height: 3.5" (89mm)
Width: 17.2" (437mm)
Depth: 24.8" (630mm)
Gross Weight: 57 lbs (25.9kg)
Expansion Slot 1x Full-height Universal I/O Expansion Slot (Riser Card Required); 3x Full-height, Full-length expansion slot; 3x Low-profile Expansion Slots
Drive Bay 24x 2.5" SAS / SATA Hot-swap drive trays
SAS/SATA Backplane 2U dual Expander Backplane, features: Scalability through cascading
3Gb support
Inband SES-2 Enclosure Management
SAS/SATA support
Dual input/output SFF 8087 connectors
Front Panel Buttons: Power On/Off Button + System Reset Button
LEDs: Power LED + Hard drive activity LED + 2x Network activity LEDs + System Overheat + Power fail
System Cooling 3x 80mm 6300 RPM PWM fans
Operating Environment (System) Operating Temperature Range: 10 - 35 C (50 to 95 F)
Non-Operating Temperature Range: -40 - +70 C (-40 to 158 F)
Humidity Range: 8 - 90% non-condensing
Non-Operating Humidity Range: 5 - 95% non-condensing
Power Supply 900W (1 + 1) Redundant AC to DC power supply w/ PFC
AC Voltage: 100 - 240V, 50 - 60Hz, 11 - 4.5Amp
+5V: 50 Amp
+5V standby: 4 Amp
+12V: 75 Amp
-12V: 0.6 Amp
+3.3V: 30 Amp
Regulatory (Power Supply Safety / EMC) USA - UL listed, FCC
Canada - CUL listed
Europe/CE Mark
CCC Certification
EN 60950/IEC 60950-Compliant
Germany - TUV Certified
