1. Quad Six-Core/Quad-Core AMD Opteron 8000 Series
2. Up to 256GB 32 DIMMS DDR2 800/667/533 SDRAM
3. 2 (x16) PCI-e slots, 1 (x8), 1(x4)(Using x8 Slot) PCI-e, and 1 64-bit 133 MHz PCI-X
4. Dual-port Gigabit Ethernet Controller
5. 6x 3.5" Hot-swap SAS/SATA Drive Bays
6. 1200W Redundant Power Supply
Motherboard
H8QM3-2
H8QMi-2
Processor/Chipset
CPU: Quad 1207-pin Socket F, Supports up to four Six-Core / Quad-Core AMD Opteron 8000 Series processors, HT3.0 Link support
Chipset: nVidia MCP55 Pro, IO 55, NEC uPD720400
System Memory
Memory Capacity: 32x 240-pin DIMM sockets support up to 256GB DDR2 800/667/533 MHz memory; Single or Dual (recommended) channel memory support; For Quad CPUs: Recommended that memory be populated equally in adjacent memory banks
Memory Type: DDR2 800/667/533MHz buffered (registered) ECC SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes: 256MB, 512MB, 1GB, 2GB, 4GB, 8GB
Memory Voltage: 1.8V only
Error Detection: Corrects single-bit errors, and Detects double-bit errors (using ECC memory)
On-Board Devices
SATA: nVidia MCP55 Pro SATA2 3.0Gbps Controller, 6 SATA2 Ports, nVidia RAID 2.0, and SATA RAID 0, 1, 0+1, 5 JBOD Support
SAS: LSI SAS1068E, RAID 0, 1, 10 support, Optional: AOC-IButton68) RAID 5 support. (SAS on H8M3-2 models only)
IMPI: Support for Intelligent Platform Management Interface v.2.0; 200-pin IPMI slot; (Optional: AOC-SIM1U(+) R 3.00); (Optional: AOC-SIMLC(+) R 3.00); RMM (Remote Management Module); (Card not included); Note: KVM-over-LAN is available on AOC-SIM1U+ only and dedicated LAN is required
Network Controllers: Intel 82546GB Dual Port Gigabit Ethernet Controller, and Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output
VGA: ATI ES1000 Graphics Controller, 16MB Graphics & VGA port
Super I/O: Winbond 83627DHG chip
System BIOS
BIOS Type: 8Mb Flash EEPROM with AMI BIOS, and SST 49LF080A BIOS Chip
BIOS Features: Plug and Play (PnP), DMI 2.3, PCI 2.2, ACPI 2.0, USB Keyboard Support, and SMBIOS 2.3
Expansion Slots
PCI-Express: 2 x16 PCI-e Slots, 1 x8 PCI-e Slot, and 1 x4 PCI-e Slot (Using x8 Slot)
PCI-X: 1 64-bit 133 MHz PCI-X (3.3V) slots
Chassis
Chassis 2U: CSE-828TQ-R1200LP, Required: Heat sink (SNK-P0023P+)
Important Chassis Notes: To ensure system stability, a 1200W (minimum) ATX power supply [ 8-pin & 8-pin (+12V) and 24-pin are required]
Input / Output
SATA: 6 SATA2 ports
SAS: 8 SAS / SATA ports (only on H8QM3-2 models)
IDE: Single EIDE channel support up to two UDMA IDE devices, Supports UDMA Mode 5, Supports PIO Mode 4, and Supports ATA 100/133
Floppy: 1 Floppy port, 1.44 MB
LAN: 2 RJ45 LAN ports
USB: Up to 4 USB Ports 2.0/1.1 Compliant, 2 Rear Ports, and 2 Internal Headers
VGA: 1x VGA port
Keyboard / Mouse: PS/2 keyboard and mouse ports
Serial Ports: 1x Fast UART 16550 serial port, and 1x serial port header
Management
Software: Optional IPMI (Intelligent Platform Management Interface) 2.0, Super Doctor III, and Watch Dog
Power Configurations: ACPI Power Management, Main Switch Override Mechanism, Wake-On-Ring (WOR) headert, Wake-On-LAN (WOL) header, Keyboard Wakeup from Soft-Off, Power-on mode control for AC power loss recovery, and Internal/External modem remote ring-on
PC Health Monitoring
CPU: Monitors CPU Core Voltages, +1.8V, +3.3V, +5V, +12V, +3.3V Standby, VBAT, and CPU switching voltage regulator
FAN: Total up to 9-fan status tachometer monitoring, Up to nine 3-pin fan headers, Status monitor for speed control, Support 3-pin fans with fan-speed control, and Low noise fan speed control
Temperature: Monitoring for CPU and chassis environment, CPU Thermal Trip Support, and PC Temperature Sensing Logic
LED: CPU / System Overheat LED, and +5V Standby Alert LED
Other Features: Chassis Intrusion Detection, and Chassis Intrusion Header
Operating Environment / Compliance
RoHS: RoHS Compliant 5/6, Server Exemption
Environmental Spec: Operating Temperature: 10 to 35 C (50 to 95 F), Non-operating Temperature: -40 to 70 C (-40 to 158 F),
Operating Relative Humidity: 8% to 90% (non-condensing), and Non-operating Relative Humidity: 5 to 95% (non-condensing)
Form Factor 2U chassis support for max. motherboard size - 16.4" x 14" E-ATX (Quad-processor motherboards)
Chassis Model: 828TQ-R1200LP
Processor Support Supports Intel / AMD Quad processors motherboards
Dimensions Height: 3.5" (89mm)
Width: 17.2" (437mm)
Depth: 27.9" (709mm)
Gross Weight: 55.4 lbs (25.1kg)
Expansion Slots 7x low-profile full-length expansion slots
Drive Bays Hot-swap: 6 x 3.5" SAS / SATA Hot-swap drive trays
SAS / SATA Backplane 1x 2U SAS / SATA backplane w/ SES-II
Front Panel Buttons: Power On/Off Button, System Reset Button
LEDs: Power LED, Hard drive activity LED, 2x Network activity LEDs, System Overheat LED, and Power fail LED
Ports: 2x Front USB Ports + DB9 COM Port (optional)
System Cooling Fans: 6x 80mm 6500 RPM fans
Operating Environment (System) Operating Temperature Range: 10 - 35C (50 to 95 F)
Non-Operating Temperature Range: -40 - +70C (-40 to 158 F)
Humidity Range: 8 - 90% non-condensing
Non-Operating Humidity Range: 5 - 95% non-condensing
Power Supply 1200W (1 + 1) Redundant high-efficiency power supply w/ PFC
AC Voltage: 100 - 240V, 50 - 60Hz, 15 - 6Amp
+5V: 30 Amp
+5V standby: 4 Amp
+12V: 100 Amp
-12V: 0.6 Amp
+3.3V: 25 Amp
Regulatory (Power Supply) Power Supply Safety / EMC: USA - UL listed, FCC; Canada - CUL listed; China - CCC Mark; Europe/CE Mark; EN 60950/IEC 60950-Compliant; Germany - TUV Certified
