|
Motherboards
2x X7DWT-INF
Processor/Cache
Dual 771-pin LGA Sockets
Supports up to Dual Intel® 64-bit Xeon®processor(s) of the same type below: Quad-Core Intel® Xeon®Processor 5400/5300 sequence
Harpertown/Clovertown processor up to 3.20 GHz Dual-Core Intel® Xeon®Processor 5200/5100 sequence (Wolfdale/Woodcrest processor) up to 3.40 GHz
System Bus
1600 / 1333 / 1066 MHz system bus
System Memory
Capacity Eight 240-pin DIMM sockets
Supports up to 64 GB 800 / 667 / 533MHz DDR2 ECC FB-DIMM memory
Dual branch memory bus
Memory must be populated in pairs
Memory Sparing supported
Memory Type 800 / 667 / 533MHz FB-DIMM (Fully Buffered DIMM) ECC DDR2 SDRAM 72-bit, 240-pin gold-plated DIMMs
DIMM Sizes 512 MB, 1GB, 2GB, 4GB, 8GB**
Memory Voltage 1.8 V or 1.5 V
Error Detection Corrects single-bit errors
Detects double-bit errors (using ECC memory)
Supports Intel® x4 and x8 Single Device Data Correction (SDDC)
On-Board Devices
Chipset Intel® 5400 (Seaburg) chipset
ESB2
Infiniband Mellanox MT25204AD-FCC-D Single-Port
SATA Intel ESB2 SATA 3.0Gbps Controller RAID 0, 1, 5, 10 support (Windows only) RAID 0, 1, 10 support (Linux)
IPMI Support for Intelligent Platform Management Interface v.2.0, v.1.5 200-pin IPMI slot (SIMSO(+)) (Optional: AOC-SIMSO(+))
Network Controllers ntel® (ESB2/Gilgal) 82563EB Dual-Port Gigabit Ethernet Controller. Supports 10BASE-T, 100BASE-TX, and 1000BASE-T, RJ45 output. Intel® I/OAT support for fast, scaleable, and reliable networking
Graphics ATI ES1000 controller with 32 MB of video memory
Super I/O Winbond 83627HF chip
Clock Generator CK410B
Input / Output
Serial ATA Four Serial ATA ports
2x RJ45 LAN ports
2x USB rear ports 2x USB internal headers. Total 4 USB 2.0 Compliant
VGA 1x VGA Port
Serial Port 1 Header
Infiniband 1 External Infiniband Connector
System BIOS
Type 8Mb Flash EEPROM with Phoenix® BIOS
Plug and Play (PnP)
DMI 2.3
PCI 2.2
ACPI 1.0/2.0
USB Keyboard support
SMBIOS 2.3
Chassis
Form Factor 1U Rackmount
Model SC808T-980B
Dimensions
Height 1.7" (43mm)
Width 17.2" (437mm)
Depth 27.75" (705mm)
Gross Weight 40 lbs (18.1kg)
Available Colors Black
Front Panel (per Node)
Power On/Off button
System Reset button
Power LED
Hard drive activity LED
2x Network activity LEDs
System Overheat LED
Expansion Slots (per Node)
PCI-Express 1 (x16) PCI-e Generation II slot
Drive Bays (per Node)
Hot-swap 2x 3.5" SATA Hot-swap drive bays
SATA Backplane
1U SATA Backplane
System Cooling
6x Cooling Fans
Power Supply
980W AC-DC power supply w/ PFC
AC Input 100 - 240V, 60-50Hz, 14-6 Amp
Management
Software Optional IPMI (Intelligent Platform Management Interface) 1.5 / 2.0
Super Doctor III
Watch Dog
NMI
Power Configurations ACPI Power Management
Main Switch Override Mechanism
Wake-On-Ring (WOR) header
Wake-On-LAN (WOL) header
Power-on mode for AC power recovery
Internal / External modem remote ring-on
PC Health Monitoring
Monitors for CPU Cores,+1.5V, +3.3V, +5V, ±12V, +3.3V Stdby, +5 Stdby, VBAT, HT, Memory, Chipset
6-Phase-switching voltage regulator with auto-sense from 0.8375V-1.60V
Total of four proprietary fan headers supporting up to 8 fans
8x fans with tachometer status monitoring
Status monitor for speed control
Temperature Monitoring for CPU and chassis environment
CPU thermal trip support
Thermal Control for 8x fan connectors
PSU I2C temperature sensing logic
Thermal Monitor 2 (TM2) support
PECI
Overheat LED
Chassis intrusion detection
Chassis intrusion header
|
